Issue 4.1 UNIVERGE SV8100
5 - 54 Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
9. Align the projections on the bottom of the 8LKD
(LD)-L UNIT into the guide holes on top of the
multiline terminal.
10. Slide the 8LKD (LD)-L UNIT toward the keypad
buttons until snug (refer to Figure 5-59 8LKD (LD)-L
UNIT Installed).
Figure 5-58 Ribbon Cable Installed
Figure 5-59 8LKD (LD)-L UNIT
Installed
To Next Page
Loading...
