Issue 4.1 UNIVERGE SV8100
5 - 58 Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
9. Align the projections on the bottom of the 8LKI
(LD)-L UNIT into the guide holes on top of the
multiline terminal (refer to Figure 5-64 Ribbon Cable
Installed).
10. Slide the 8LKI (LD)-L UNIT toward the keypad
buttons until snug (refer to Figure 5-65 8LKI (LD)-L
UNIT Installed).
Figure 5-64 Ribbon Cable Installed
Figure 5-65 8LKI (LD)-L UNIT
Installed
To Next Page
Loading...
