Issue 4.1 UNIVERGE SV8100
5 - 82 Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
17. Push the latch to release the cover (see Figure 5-100 Stowing
the Bottom Unit Cable). Stow the extra bottom unit connecting
cable and close the cover.
18. Cut or trim the supplied coupled device for the tilt legs handset
option.
19. Insert the stopper coupled device into the right and left tilt legs
(see Figure 5-101 Insert Stopper for Handset Use).
20. Set the coupled device for tilt legs into position.
Figure 5-100 Stowing the Bottom Unit Cable
Figure 5-101 Insert Stopper for Handset Use
To Next Page
Loading...
