Issue 4.1 UNIVERGE SV8100
5 - 86 Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
4. Turn multiline terminal upside down.
5. Lower the tilt leg to the first position (refer to Figure 5-93
Separate Tilt Leg from Leg Support).
6. Hook the wall mount holes (C and D) on the back of the
terminal on wood screws (c and d) installed.
Figure 5-106 Separate Tilt Leg from Leg Support
Figure 5-107 Wall Mounting the Terminal
To Next Page
Loading...
