UNIVERGE SV8100 Issue 4.1
System Hardware Manual 6 - 7
6. Repeat Steps 4 and 5 for any additional connections required.
7. Replace the cover and tighten the screw to hold the cover in place.
8. If required for the function being used, insert the RCA connectors into
the CN2 (Channel 1) and CN3 (Channel 2) connectors on the back of the
PGD(2)-U10 ADP.
Figure 6-6 Connecting Cable to the PGD(2)-U10 ADP
To Next Page
Loading...
