NEC Univerge SV8100 - Page 51

UNIVERGE SV8100 Issue 4.1
System Hardware Manual 2 - 15
ITL-8LD-1 TEL Class 2 130mA 6.2W 235mA 5.6W 81mA 3.9W 137mA 3.3W
ITL-24D-1 TEL Class 2 130mA 6.2W 235mA 5.6W 81mA 3.9W 137mA 3.3W
ITL-12D-1 TEL Class 2 130mA 6.2W 235mA 5.6W 81mA 3.9W 137mA 3.3W
ITL-24PA-1 TEL Class 2 130mA 6.2W 235mA 5.6W
–
0.0W
–
0.0W
ITL-24PD-1 TEL Class 2 130mA 6.2W 235mA 5.6W
–
0.0W
–
0.0W
ITL-24BT-1 TEL Class 2 130mA 6.2W 235mA 5.6W
–
0.0W
–
0.0W
ITL-6DE-1 TEL Class 1 68mA 3.3W 122mA 2.9W 68mA 3.3W 122mA 2.9W
ITL-2E-1 TEL Class 1 68mA 3.3W 122mA 2.9W 68mA 3.3W 122mA 2.9W
Label Indication:
IP Value/Sophisticated – Maximum watts when adding options or modular upgrades.
IP Value – Maximum watts when ITL-12D-1 TEL is changed to ITL-8LD-1 TEL or ITL-24D-1 TEL.
Table 2-9 IP Terminal Power Chart (Continued)
IP
Terminal
IEEE802.
3af
Class
Label Indication
(Maximum Current with All Options)
Maximum Current Without Options
48VDC 24VDC 48VDC 24VDC
Table 2-10 IEEE802.af Class Specifications
IEEE802.3af Minimum Maximum
Class 4 – –
Class 3 6.49W 12.95W
Class 2 3.84W 6.49W
Class 1 0.44W 3.84W
Class 0 0.44W 12.95W
Table 2-11 TDM terminal Power Chart
TDM Terminal
Power
Consumption
DTL-2E-1 1.0W
DTL-6DE-1 1.1W
DTL-8LD-1 2.2W
DTL-12D-1 2.0W
DTL-24D-1 2.0W
DTL-32D-1 2.4W