Issue 4.1 UNIVERGE SV8100
3 - 8 Installing the SV8100 Chassis
6. Align the metal fitting with the upper wall mount bracket. The
lower metal fitting rests against the lower wall mount bracket.
Secure the metal fitting and upper wall mount bracket with a
single screw (see Figure 3-8 Secure Metal Fitting to Upper Wall
Mount Bracket with a Screw).
7. Using two screws, secure the metal fitting to the lower wall
mount bracket. Refer to Figure 3-9 Secure Metal Fitting to
Lower Wall Mount Bracket with Screws on page 3-9 for screw
location.
Figure 3-8 Secure Metal Fitting to Upper Wall Mount Bracket
with a Screw
To Next Page
Loading...
