UNIVERGE SV8100 Issue 4.1
System Hardware Manual 3 - 27
Brackets Secured in Mounting Position with Screws).
6. Rotate the brackets into the mounting position. Using the same
screws, secure the metal brackets to the bracket assembly
(refer to Figure 3-30 Brackets Secured in Mounting Position
with Screws).
7. Remove the end brackets from the remaining two corners and
set aside (refer to Figure 3-31 Remove End Brackets on page
3-28).
Figure 3-30 Brackets Secured in Mounting Position with Screws
To Next Page
Loading...
