8.1.4 How to reset the printer
To reset the printer to the factory settings, you have to start the printer in a special mode.
Non-Mechanical Reset (resets all settings, except for mechanical settings):
1. Turn off the printer
2. Press AND hold the following key: Quick
3. Turn on the printer
4. Keeping holding the Quick
key until the printer shows
Non-Mechanical Reset
Alignmt Values Saved
5. Release the Quick
key and the printer will be ready to use.
Default Reset (resets all settings):
1. Turn off the printer
2. Press AND hold the following key: Home
3. Turn on the printer
4. Keeping holding the Home
key until the printer shows
Printer XXX
Default Reset
5. Release the Home
key and the printer will be ready to use.
Mechanical settings
Make sure to re-enter all required mechanical settings (e.g. ADJUST
TOF) after performing a default reset!
Pos: 70 /Bedienungsanlei tungen/Geräte neu tral/8.2_Ü2_Troub leshooting @ 0\mod_125120 3477457_912.doc @ 3102 @ 2
To Next Page
Loading...
