7 How to connect the printer to the PC
To connect the printer to a PC, use either the USB interface or the Ethernet interface of the
printer. To connect the printer to a network, use the Ethernet interface.
Independent from the interface (USB or Ethernet), it is necessary to install a printer driver
on the PC that will be used to send data to the printer.
Follow the installation procedures
Please follow the installation procedures described in this chapter.
Please stick to the order of installation steps (e.g connecting the
printer to the PC) as described in this chapter.
• Please see chapter 7.1 on how to install and configure the printer driver.
• Please see chapter 7.2 on how to use the USB interface
• Please see chapter 7.3 on how to use the Ethernet interface
The printer will work either with the USB interface or with the
Ethernet interface. The two interfaces cannot be used together at the
same time.
Pos: 62.2 /Bedienungsan leitungen/Geräte s pezifisch/Druc ker/Printer Dri ver & Cables to PC/7.X_Ü2_How to inst all and configure the pri nter driver_ONLY_61 9 @ 3\mod_1295280186142_9 12.doc @ 29403 @ 233
7.1 How to install the printer driver
7.1.1 Windows XP and Windows Vista
1. Insert the
driver CD-ROM
• Insert the Neopost CD-ROM in the CD drive of your PC.
To Next Page
Loading...
