11.8 Additional display texts
Under certain circumstances, additional information texts may be shown in the main
display. In the table below you find descriptions for the different information texts.
Information in main display Description
Test
The printer is running test prints.
WaitEOT
A pause command was sent to the printer. It will only
continue with the print job, when the Ok
key is
pressed.
NoData!
The data for a page was not sent completely to the
printer.
PapRUN
The printer is running a paper run test.
NoPaper
Data but no paper. E.g. the feeder is empty.
EmerMode
The printer is in emergency mode, because the
internal model identification is damaged. In this
unlikely event the printer will only work with a
reduced performance to prevent the printer from any
damage. Please contact your Neopost branch or
dealer.
Pos: 106 /Bedienungsanl eitungen/Geräte spe zifisch/Dr ucker/11.x_Ü2_Ink package ID number @ 2\mod_12692492300 92_912.doc @ 13727 @ 2
11.9 Ink package ID number
The id number of the loaded ink package clearly indicates the settings and ink parameters
currently used in your printer. With this ink package id number changes and updates can
easily be tracked.
Pos: 107 /Bedienungsanl eitungen/Geräte spe zifisch/Dr ucker/11.x_Ü3_Ink package ID number 6030206 @ 3\mod_129829 6700989_912.doc @ 30527 @ 3
11.9.1 ID: 6030206
The following settings and parameters are used with this id number:
Ink type Note
d BLACK DYE
Limitation on shuttle-head printers (AS-700 and AS-
710) only:
The maximum carriage speed is limited to 0.526
mm/s / 103.5 ft./min. This ensures a constantly high
print quality and increases the life time of the ink
cartridge.
v VERSATILE BLAC
m MAX GLOSSY
f FAST DRY BLACK
i IQ INK
x #10 INK
Limitation on shuttle-head printers (AS-700 and AS-
To Next Page
Loading...
