54 User Manual Version 3.1
COMMUNICATION
This feature is used to select the interface used for the communication between the printer
and the PC. Select the interface and press the Ok
key.
Option Note
USB
The USB interface will be used.
TCP/IP
dynamic IP
fix IP
The TCP/IP interface will be used.
dynamic IP
Port Number
Default: 9100
fix IP
Port Number
Default: 9100
IP Address
Default: 192.168.50.180
Subnet Mask
Default: 255.255.255.000
Gateway IP Address
Default: 192.168.50.252
Default: USB
Pos: 61.35 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Menüpunkte Druc ker/Ü3/Ü4/Ü3_1517_PA GE DATA SIZE_FROM_FW_4.8 @ 3\mod_1297871830429_91 2.doc @ 30350 @
PAGE DATA SIZE
This menu is used to select how much of the printer memory should be reserved for storing
pages. If the feature AUTOM.PAGE REPEAT is used and the job contains with large graphics it
is recommended to set PAGE DATA SIZE to maxim.
Option Note
default
Least amount of memory is reserved.
level1
level2
maxim
Largest amount of memory is reserved.
Default: default
Pos: 61.36 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Menüpunkte Druc ker/Ü2/Ü2_1600_INK @ 0\ mod_1253108139897_912. doc @ 3377 @
To Next Page
Loading...
