Neopost AS-710 - EJECT Delay[Sec]; Optimization; Printmode

62 User Manual Version 3.1
PRINTMODE
This feature is used to set if the printer should print on the forward and on the backward
movement of the cartridge carriage, only on the forward movement or if that should be
handled automatically.
Option Note
bidirectional
The printer will print on the forward as well as on the
backward movement of the cartridge carriage.
Choose this option for maximum throughput.
unidirectional
A text or an image is only printed when the print
carriage is travelling from the home position. At the
end of the printed line, the print carriage returns
home before repeating this process for the next line.
Choose this option for a very precise alignment of the
printed image.
automatic
The printer will choose “bidirectional” for text only
print jobs and will choose “unidirectional” for print
jobs with graphics.
Default: automatic
Pos: 61.59 /Bedienungsan leitungen/Gerät e spezifisch/Dr ucker/Menüpunkte Druc ker/Ü3/Ü4/Ü3_2209_OP TIMIZATION_only_Shu ttle_Head @ 0\mod_12 54914556346_912.doc @ 4955 @
OPTIMIZATION
This feature is used to optimize how the printer handles a print job, by providing the
operator with the choice of better print speed (throughput) or better print quality/alignment
characteristics.
Option Note
speed
This choice will optimize the printer's carriage
movements for better print speed (throughput) versus
better print quality/alignment characteristics.
quality
This choice will optimize the printer's carriage
movements for better print quality/alignment
characteristics versus better print speed (throughput).
By doing so, the print speed (throughput) will be
reduced.
Default: speed
Pos: 61.60 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Menüpunkte Druc ker/Ü3/Ü4/Ü3_2210_EJ ECT DELAY[Sec] @ 0\mod_1254 914556940_912.doc @ 4963 @
EJECT DELAY[Sec]
The ejection of the material after printing can be delayed. The duration of this delay can be
set up to 9.9 seconds in this menu.
Default: 0.0
Pos: 61.61 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Menüpunkte Drucker /Ü3/Ü4/Ü3_2203_SEPARA TION_nur LOG Geräte und Systeme mit e xt. Feeder @ 0\mod_125491404 9702_912.doc @ 4887 @