48 User Manual Version 3.1
PRINTER CONFIG.
This menu provides access to the following features.
Pos: 61.18 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Menüpunkte Druc ker/Ü2/Ü2_1100_MAI NENANCE @ 0\mod_12544839651 67_912.doc @ 4041 @
MAINTENANCE
Pos: 61.19 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Menüpunkte Druc ker/Ü3/Ü4/Ü3_1104_CLE ANING CYCLE_Shuttle Head @ 0\mod_125448671352 2_912.doc @ 4084 @
CLEANING CYCLE
Here you can set the number of pages after which the printer performs a cleaning cycle.
This means that the printer will stop printing, move the ink cartridge to the cleaning
position and perform the purge the cartridge. After the cleaning the printer will resume the
print job.
50 PG, 100 PG, 200 PG, 300 PG, 1000 PG
Default: off
Pos: 61.20 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Menüpunkte Druc ker/Ü3/Ü4/Ü3_1105_P URGE LEVEL @ 0\mod_125474180260 1_912.doc @ 4197 @
PURGE LEVEL
Here you can set the intensity at which a cartridge is cleaned before a job and during
cleaning cycles.
Single page printing
When printing single page jobs (e.g. print of one page every few
minutes) it is recommended to reduce the PURGE LEVEL.
minim, lev1, lev2, lev3, lev4, lev5, lev6, lev7, lev8, maxim
Default: maxim
Pos: 61.21 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Menüpunkte Drucker /Ü3/Ü4/Ü3_1108_CAPPI NG DELAY @ 0\mod_1254486899951_912. doc @ 4088 @
CAPPING DELAY
Here you can set the time after which the printer will move the ink cartridge back into the
capping station. It is recommended to set the time to a higher value than the time between
two pages. E.g. when printing single pages with 30 seconds delay between each page, you
should set the capping delay to at least 40 seconds.
off, 10s, 20s, 30s, 40s, 50s, 60s, 2min, 3min, 4min, 5min
Default: off
Pos: 61.22 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Menüpunkte Drucker /Ü3/Ü4/Ü3_1109_KEEP ALIVE _FROM_FW_4.8 @ 3\mod_1298357904 534_912.doc @ 30543 @
To Next Page
Loading...
