INK
Select INK in the PRINTER CONFIG. menu and hit the Ok
key. You will be presented with
the following choices:
Pos: 61.37 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Menüpunkte Drucker /Ü3/Ü4/Ü3_1601_SET I NK TYPE_Freigabe Level 0_SHUTTLE HEAD ONLY_FW_4.8 @ 2\mod_12716 63056519_912.doc @ 16784 @
SET INK TYPE
Here the used ink type has to be selected. The listed parameters are optimized for the
different Neopost inks. The parameters directly affect the electrical signals from the printer
to the cartridge and are important for a correct ink drop formation.
The chosen ink type will be displayed above the ink level bar in the printer display (e. g.
“VERSATILE”).
Special application inks
Some special application inks parameters are only available by
feature update.
Please contact your authorised Neopost dealer for further information.
Option Note
d BLACK DYE
Versatile Black ink cartridge
m MAX GLOSSY
Max Glossy ink cartridge
v VERSATILE BLAC
Black Dye ink cartridge
f FAST DRY BLACK
Fast Dry Black ink cartridge
i IQ INK
IQ ink cartridge
x #10 INK
#10 ink cartridge
s SPOT COLOUR
Spot Color ink cartridge
q IMS INK
IMS ink cartridge
Special application ink for printing on difficult
substrate. Please read the additional operation
instructions for this ink typ.
u USER INK
Not optimized default parameter.
This parameter can be used for all not Neopost
approved inks.
Default: d BLACK DYE
Always set the ink type according to your actually used ink!
The different parameters are optimized for these types.
Wrong assignations can lead to overheating and damage of the
cartridges.
Pos: 61.38 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Menüpunkte Drucker /Ü3/Ü4/Ü3_1602_RESET I NK LEVEL_shuttlehead @ 1\mod_125 6552398830_912.doc @ 7073 @
To Next Page
Loading...
