Neopost AS-710 - Clean Head; Exchange Cartridge; Linefeeds Forward; Linefeeds Back

46 User Manual Version 3.1
The printer will do test prints with the set test pattern. To see which pattern is set go to the
menu SERVICE > SELECT TEST PATT. Please hit the Cancel
key to stop the printer.
• Select TEST PRINT in the QUICK MENU and hit the Ok
key.
• Hit the Cancel
key to stop the printer.
You can also use the following key combination:
Quick
+ Arrow up (long) = TEST PRINT
Pos: 61.11 /Bedienungsan leitungen/Gerät e spezifisch/Dr ucker/Menüpunkte Druc ker/Quick Menü/Ü2_6010 b_CLEAN HEAD_700/710 @ 0\mod _1254923968184_912. doc @ 5290 @
CLEAN HEAD
The printer will perform a cleaning cycle. The ink cartridge will shoot a small amount of ink
into the integrated ink basin. This function is useful to reactivated clogged nozzles.
You can also use the following key combination:
Quick +
= CLEAN HEAD
Pos: 61.12 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Menüpunkte Druc ker/Quick Menü/Ü2_6013 _EXCHANGE CARTRIDGE SHUTTLE H EAD @ 0\mod_1254992913254_9 12.doc @ 5347 @
EXCHANGE CARTRIDGE
The cartridge moves out of its capping position, allowing a convenient exchange.
After exchanging the cartridge hit the Ok
key.
If you inserted a new cartridge the printer will display RESET INK LEVEL?. Pressing the Ok
key () will set the ink level to 100%. If you re-inserted the same cartridge press the
Cancel
key (). The ink level will be left unchanged.
The printer will ask you if you want to perform a print head test (). Hit the Ok
key to
perform the print head test or hit the Cancel
key to continue without the test.
Pos: 61.13 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Menüpunkte Druc ker/Quick Menü/Ü2_6015 _LINEFEEDS FORWARD_AS- 700/710 @ 0\mod_1254924961 283_912.doc @ 5314 @
LINEFEEDS FORWARD
Print position set forward by one line.
This function can be used to set the start of the print area for Microsoft DOS applications.
For Microsoft Windows based software this setting is not required.
Pos: 61.14 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Menüpunkte Druc ker/Quick Menü/Ü2_6016 _LINEFEEDS BACK_AS-700/7 10 @ 0\mod_125492496365 7_912.doc @ 5318 @
LINEFEEDS BACK
Print position set back by one line.
This function can be used to set the start of the print area for Microsoft DOS applications.
For Microsoft Windows based software this setting is not required.
Pos: 61.15 /Bedienungsan leitungen/Gerät e spezifisch/Dr ucker/Menüpunkte Druc ker/Quick Menü/Ü2_6017 _SHOW LAST ERRORS @ 0\mod_125492 4965999_912.doc @ 5322 @
SHOW LAST ERRORS
The last three error messages and there corresponding error code are shown. In addition to
that the page count at which the error occurred is shown for each error message.
• Select SHOW LAST ERRORS in the QUICK MENU and hit the Ok
key.
Pos: 61.16 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Menüpunkte Druc ker/Ü1/Ü0_0000_MAI N MENU @ 0\mod_1254487458572_912. doc @ 4106 @