Neopost AS-710 - Additional Error Messages

User Manual Version 3.1 127
8.4.2 Additional Error Messages
Pos: 84.1 /Bedienungsan leitungen/Geräte s pezifisch/Druc ker/Monitor Messages/M 01_Checksum error flash -> RAM transfer @ 2\mod_12 71940887638_912.doc @ 16833 @
No. Message Cause
M01 MONITOR-ERROR: M01
FAULT: xxxxxxxx
CHKSUM:ssss-ssss
Checksum error while transferring
the flash into the RAM memory
Elimination
• Restart the printer
Pos: 84.2 /Bedienungsan leitungen/Geräte s pezifisch/Druc ker/Monitor Messages/M 02_USB-EPROM Read @ 2\mod_1271 941102636_912. doc @ 16837 @
No. Message Cause
M02 MONITOR-ERROR: M02
READ USB-EEPROM
RETRY, Call SERVIC
USB-EPROM could not be read
Elimination
• Retry • When error still occurs call
service
os: 84.3 /Bedienungsan leitungen/Geräte sp ezifisch/Druc ker/Monitor Messages/M 03_USB-EPROM Wri te @ 2\mod_1271941243073_912.doc @ 16841 @
No. Message Cause
M03 MONITOR-ERROR: M03
WRITE USB-EEPROM
RETRY, CALL SERVIC
USB-EPROM could not be written on
Elimination
• Retry • When error still occurs call
service
Pos: 84.4 /Bedienungsan leitungen/Geräte s pezifisch/Druc ker/Monitor Messages/M 04_EPROM Record S0 Checksu mm Error @ 2\mod_1271941 245182_912.doc @ 16845 @
No. Message Cause
M04 MONITOR-ERROR: M04
S0 FAULT CHECKSUM
REF: xx NOW: xx
Checksum of record S0 is faulty.
REF = reference value
NOW = actual value
Elimination
• Transfer the hex file again
• Check if hex file is correct
• When error still occurs call
service
Pos: 84.5 /Bedienungsan leitungen/Geräte s pezifisch/Druc ker/Monitor Messages/M 05_EPROM none PPC @ 2\mod_1271941 247276_912.doc @ 16849 @
No. Message Cause
M05 MONITOR-ERROR: M05
INVALID FILE -PPC
Identifier of hex file is not valid.
None PPC type.
Elimination
• Check if hex file is correct