Neopost AS-710 - Page 126

126 User Manual Version 3.1
Protocol
code
Display message Cause
38 Feature disabled in this mode
CODE: BD
Address repeating not available in
read and print mode
Elimination
•
Pos: 82.16 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Warning Messages/BE_PAPE R_SENSOR_SHOULD_BE_VERIFI ED @ 2\mod_1265636723269_912. doc @ 11568 @
Protocol
code
Display message Cause
39 PAPER SENSOR SHOULD BE
VERIFIED!
CODE: BE
The paper sensor is detecting paper
before starting to print or
measuring the paper size
Elimination
• Remove any paper under the
sensor
Pos: 82.17 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Warning Messages/BF_SPEED _TOO_HIGH_FOR_THE_INK_ TYPE @ 2\mod_1265636725488_ 912.doc @ 11572 @
Protocol
code
Display message Cause
40 Speed limitation for the ink type
CODE: BF
The speed of the transport system
is too high for the selected ink type
Elimination
• Reduce the speed of the
transport system
Pos: 82.18 /Bedienungsan leitungen/Gerät e spezifisch/Dr ucker/Warning Messages/ BG_FONT_LOADING_WARNI NG @ 2\mod_1265884878154 _912.doc @ 11862 @
Protocol
code
Display message Cause
41 Font loading warning RAM
memory is full!
CODE: BG
Insufficient memory for the font
Elimination
• Reduce number of fonts used
in print job
Pos: 82.19 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Warning Messages/ BH_MACRO_LOAD_WARNIN G @ 2\mod_1265884878279_912. doc @ 11866 @
Protocol
code
Display message Cause
42 Macro load warning RAM
memory is full!
CODE: BH
Insufficient memory for the macro
Elimination
• Reduce the size of the macro
Pos: 83 /Bedienungsanlei tungen/Geräte spezi fisch/Druc ker/8.x_Ü3_Additional_Er ror_Messages @ 2\ mod_1277120986227_912. doc @ 18815 @ 3