Protocol
code
Display message Cause
29 Warning:rotate font feature not
enabled!
CODE: AQ
The menu PRINTER CONFIG. >
BOOT DEFAULTS > TEXT ROTATION
is set to off and the printer
received a control sequence for
rotated text
Elimination
• Set the menu PRINTER
CONFIG. > BOOT DEFAULTS >
TEXT ROTATION to on.
Pos: 82.12 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Warning Messages/ AR_Warning:Wr ong_Data _Check_The_Printou t! @ 2\mod_1265636736786_ 912.doc @ 11592 @
Protocol
code
Display message Cause
30 Warning:wrong data check the
printout!
CODE: AR
Undefined or faulty data were
detected by the printer
Elimination
• Check if the data cable is
connected correctly at the
printer and at the PC
• Check if you use the official
printer driver
• Try to run the print job from
a different PC
Pos: 82.13 /Bedienungsan leitungen/Gerät e spezifisch/Dr ucker/Warning Messages/ AX_Warning:_NO_ink! _change_cartri dge @ 2\mod_1265636709939_9 12.doc @ 11544 @
Protocol
code
Display message Cause
33 Warning: no ink! change
cartridge
CODE: AX
A ink cartridge is out of ink and the
menu PRINTER CONFIG. > ERROR
HANDLING > ERROR LOW INK >
EMPTY CARTRIDGE is set to cont.
print
Elimination
• Exchange the ink cartridge
Pos: 82.14 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Warning Messages/BC_I NK_TYPE_IS_INCOMPATIBLE! @ 2\mod_1265636718268_912. doc @ 11560 @
Protocol
code
Display message Cause
37 Ink type is incompatible!
CODE: BC
This combination of different ink
types is not compatible due to
different energy settings
Elimination
• Use only one type of ink
Pos: 82.15 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Warning Messages/ BD_Feature_Disab led_In_This_Mode @ 2\mod_12 65636720409_912.doc @ 11564 @