124 User Manual Version 3.1
Protocol
code
Display message Cause
20 Macro height does not match!
CODE: AH
Error in PC software, difference
between macro size sequence and
real macro size
Elimination
• Call service • Error in Data transmission
Pos: 82.8 /Bedienungsan leitungen/Geräte s pezifisch/Druc ker/Warning Messages/AI _Macro_ID#_In_Us e_Macro_Load_Ignored @ 2\ mod_1265635649876 _912.doc @ 11524 @
Protocol
code
Display message Cause
21 Macro ID# in use macro load
ignored!
CODE: AI
A macro with the same id number
is already stored in the printer
Elimination
• Reset the printer
Pos: 82.9 /Bedienungsan leitungen/Geräte s pezifisch/Druc ker/Warning Messages/AJ _Image_Height_E xceeds_The_Maximum_Val ue @ 2\mod_1265635768 480_912.doc @ 11528 @
Protocol
code
Display message Cause
22 Image height exceeds the
maximum value!
CODE: AJ
Print data outside of the printing
area
Elimination
• Reduce image size • Check the position of the
print data, including empty
lines, Text wrap in the text
box.
Pos: 82.10 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Warning Messages/ AK_Warning:_Wr ong_True_Type_Font_Data! @ 2\mod_126563649195 1_912.doc @ 11532 @
Protocol
code
Display message Cause
23 Warning: wrong TrueType font
data!
CODE: AK
A print job selects a font which is
not available (loaded) in the printer
and the menu SOFT FONT ERROR is
set to
Elimination
• Do not repeat pages after a
job has ended
• Do not turn off the printer
during job data transfer
• Unlock the font in the printer
menu
• To interrupt a print job use
the Cancel
and the Ok
keys on the printer
Pos: 82.11 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Warning Messages/ AQ_Warning:_Rotate_Fo nt_Feature_NOT_Enab led! @ 2\mod_12656367 34410_912.doc @ 11588 @
To Next Page
Loading...
