Below is an explanation of how the different secondary functions of the arrow keys work:
Quick key
+
Secondary Function
Arrow up (Test Print)
(Short) The printer will display Test and feed one
page and print the test pattern, using the current
printer setting (e.g. print quality).
(Long) The printer will display Test and feed pages
and print the test pattern continuously, using the
current printer setting (e.g. print quality). To stop, hit
the Cancel (Offline)
key.
Arrow right (Paper Length)
(Short) The printer will display Paper Length: , feed
one page and measure the size of the page. The
measured size will be shown in the display.
(Long) The printer will display Paper Length: (L),
feed one page and measure the size of the page. The
measured size will be shown in the display. The (L)
indicates that the measured page size will be locked in
the printer, so that the page size cannot be changed
from a PC program.
Arrow down (Clean Heads) The printer will feed one page and print a pattern of
bars, using the currently set page size.
Arrow left (Run Paper) (Short) The printer will feed one page and transport
it, using the current printer setting (e.g. transport
speed).
(Long) The printer will display PapRUN and feed and
transport pages continuously, using the current
printer setting (e.g. transport speed). To stop hit the
Cancel (Offline)
key.
This is an useful function to check if, the separation
and the material transport of the printer, are setup
correctly.
Pos: 41 /Bedienungsanlei tungen/Geräte spezi fisch/Druc ker/4.4.2_Ü3_Main_Disp lay @ 1\mod_1261142768887_9 12.doc @ 9017 @
To Next Page
Loading...
