32 User Manual Version 3.1
Installing the
ink cartridge
Please put the cartridge into the mounting, by cautiously pushing it
downwards in a straight movement. Do not force or “turn in” the
cartridge into its mounting by hand.
The cartridge should be in a slightly inclined position. The restraining
lever then tilts the cartridge into its final position.
• Open the stop lever completely.
• Take the ink cartridge out of the packaging and remove the
protection tape from the print nozzles.
• Insert the ink cartridge with the print nozzles facing downwards -
do not push in the direction of the restraining lever.
• Lock the lever in direction of the arrow as shown in Figure 9. Thus,
the ink cartridge is tilted into its final position, and the contact is
established correctly.
Handling ink cartridges
Do not touch the contacts or the nozzle plate of an ink cartridge. This
may lead to reduced print quality.
Ink cartridges
We recommend to use only supported Neopost inks in connection
with this printer. Refilled ink cartridges may result in bad printing
quality and may damage the printer.
Please see chapter 9.1 Consumables, on page 133 for applicable ink cartridges.
Pos: 51 /Bedienungsanlei tungen/Geräte spezi fisch/Druc ker/AS-710/5.2b_How to insta ll the ink cartri dge_Shuttle Head_Step 2 @ 2\mod _1270115344904_912. doc @ 14264 @
Close the
safety cover
• Close the transparent safety cover.
• The printer will display:
RESET INK LEVEL?
Ok=YES Cancel=NO
• If you inserted a new cartridge press the Ok
key (YES).
This will set the ink level to 100%.
• If you re-inserted the same cartridge press the Cancel
key
(NO). The ink level will be left unchanged.
• The printer will display:
EMERGENCY RELEASED
Please wait...
• The installation of the ink cartridge is completed.
Pos: 52 /Bedienungsanlei tungen/Geräte spezi fisch/Druc ker/AS-710/5.3_How to setup the f eeder_AS-700/710 @ 2\mod_1270546598066_ 912.doc @ 14284 @ 2
To Next Page
Loading...
