S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Configure Switching User Manual126
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Discover or Change the Switch IP
Address on page 12.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is
password.
The System Information page displays.
5. Select Switching > VLAN >
Advanced > VLAN Membership.
The previous figure shows the LAG Membership page for models GS324T and GS324TP.
6. In the VLAN ID menu, select the VLAN ID.
You can select a VLAN that is predefined or that you added (see
Add a VLAN on
page 123).
7. In the Group Operation menu, select one of the following options, which applies to all ports
in the VLAN:
• Untag All. For all ports and LAGs that are members of the VLAN, tags are removed
from all egress packets.
• Tag All. For all ports and LAGs that are members of the VLAN, all egress packets are
tagged.
• Remove All. All ports and LAGs are removed from the VLAN.
8. In the Ports table, click each port once, twice, or three times to configure one of the following
modes or reset the port to the default mode:
• T (T
agged). Selects the port as a tagged port in the VLAN. All frames transmitted on
the port are tagged for this VLAN.