EasyManuals Logo

NETGEAR GS324T User Manual

NETGEAR GS324T
365 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Configure System Information User Manual39
If you do not know the IP address of the switch, see Discover or Change the Switch IP
Address on page 12.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is
password.
The System Information page displays.
5. Select System > Management > System CPU Status > CPU Threshold.
6. Specify the thresholds:
Rising Threshold. Notification is generated when the total CPU utilization exceeds
this threshold value over the configured time period. The range is 1 to 100.
Rising Interval. This utilization monitoring time period can be configured from 5 to
86400 seconds in multiples of 5 seconds.
Falling Threshold
. Notification is triggered when the total CPU utilization falls below
this level for a configured period of time.
The falling utilization threshold must be equal to or less than the rising threshold
value. The falling utilization threshold notification is sent only if a rising threshold
notification was sent previously. Configuring the falling utilization threshold and time
period is optional. If the Falling CPU utilization settings are not configured, the switch
uses the same values as the values that are used for the Rising CPU utilization.
The
range is 1 to 100.
Falling Interval.
The utilization monitoring time period can be configured from
5 seconds to 86400 seconds in multiples of 5 seconds.
Free Memory Threshold
. The free memory threshold value for the CPU in KB.
7. Click the Apply button.
Y
our settings are saved.

Table of Contents

Other manuals for NETGEAR GS324T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS324T and is the answer not in the manual?

NETGEAR GS324T Specifications

General IconGeneral
Switch typeManaged
Switch layerL2/L3/L4
ARP inspectionYes
Master (outer) case width270 mm
Master (outer) case height271 mm
Master (outer) case length481 mm
Master (outer) case weight8850 g
Harmonized System (HS) code85176990
Quantity per master (outer) case3 pc(s)
Package typeBox
Package depth465 mm
Package width229 mm
Package height79 mm
Package weight2710 g
Cables includedAC
Stackable-
Product colorBlack
Input current5 A
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)13.5 W
Operating temperature (T-T)0 - 40 °C
MAC address table16000 entries
Power connectorAC-in jack
SFP module slots quantity2
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity24
Number of VLANs256
Networking standardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3az, IEEE 802.3x
Virtual LAN featuresPrivate VLAN, Voice VLAN, Port-based VLAN
DHCP featuresDHCP client
Weight and Dimensions IconWeight and Dimensions
Depth169 mm
Width328 mm
Height43 mm
Weight1620 g

Related product manuals