S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Configure System Information User Manual43
Configure the Time Settings With SNTP and Configure the Global SNTP
Settings
To configure the time by using SNTP and configure the global SNTP settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Discover or Change the Switch IP
Address on page 12.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is
password.
The System Information page displays.
5. Select System > Management > T
ime > Time Configuration.
The
Time Configuration page displays.
6. Select the Clock Source SNTP radio button.
The switch can set its local clock to SNTP only if the following two conditions are met:
• You configured the settings for an SNTP server. (For a unicast SNTP server, see
Configure an SNTP Server on page 47).
• The switch can contact the SNTP server.