EasyManuals Logo
Home>NETGEAR>Switch>GS324T

NETGEAR GS324T User Manual

NETGEAR GS324T
365 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Configure System Information User Manual49
address is a DNS host name, then that host name is resolved into an IP address each
time an SNTP request is sent to it.
8. If the UDP port on the SNTP server to which SNTP requests are sent is not the standard
port (123), specify the port number in the Port field.
The range is from 1 to 65535. The default value is 123.
9. In the Priority field, specify the priority order which to query the servers.
The SNTP client on the device continues sending SNTP requests to different servers until
a successful response is received, or all servers are exhausted.
The priority indicates the
order in which to query the servers.
The request is sent to an SNTP server with a priority
value of 1 first, then to a server with a priority value of 2, and so on. If any servers are
assigned the same priority, the SNTP client contacts the servers in the order that they
appear in the table. The range is from 1 to 3. The default value is 1.
10. In the V
ersion field, specify the NTP version running on the server.
The range is 1 to 4.
The default value is 4.
11. Click the Add button.
The SNTP server entry is added.
12. Repeat the previous steps to add additional SNTP servers.
You can configure up to three SNTP servers.
The SNTP Server Status table displays status information about the SNTP servers
configured on your switch.
The following table describes the SNTP Server Global Status
information.
Table 11. SNTP Server Status information
Field Description
Address All the existing server addresses. If no server configuration exists, a message stating
that no SNTP server exists displays on the page.
Last Update Time The local date and time (UTC) that the response from this server was used to update
the system clock.
Last Attempt Time The local date and time (UTC) that this SNTP server was last queried.

Table of Contents

Other manuals for NETGEAR GS324T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS324T and is the answer not in the manual?

NETGEAR GS324T Specifications

General IconGeneral
Switch typeManaged
Switch layerL2/L3/L4
ARP inspectionYes
Master (outer) case width270 mm
Master (outer) case height271 mm
Master (outer) case length481 mm
Master (outer) case weight8850 g
Harmonized System (HS) code85176990
Quantity per master (outer) case3 pc(s)
Package typeBox
Package depth465 mm
Package width229 mm
Package height79 mm
Package weight2710 g
Cables includedAC
Stackable-
Product colorBlack
Input current5 A
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)13.5 W
Operating temperature (T-T)0 - 40 °C
MAC address table16000 entries
Power connectorAC-in jack
SFP module slots quantity2
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity24
Number of VLANs256
Networking standardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3az, IEEE 802.3x
Virtual LAN featuresPrivate VLAN, Voice VLAN, Port-based VLAN
DHCP featuresDHCP client
Weight and Dimensions IconWeight and Dimensions
Depth169 mm
Width328 mm
Height43 mm
Weight1620 g

Related product manuals