DescriptionSetting
Select any of the options to define where to align the image
on the media.
For more information, see ‘Set the 'Alignment' mode ’ on
page 178.
'Alignment'
Define how much you want the image to shift horizontally,
in the chosen alignment position.
'Horizontal shift'
Define how much you want the image to shift vertically,
in the chosen alignment position.
'Vertical shift'
Overview of the 'Print job defaults' - 'Image'
Note:
For this procedure, you need to log in as a Key operator.
Open the 'Preferences' - 'Print job defaults' tab. Go to 'Image' and click edit in the upper
right hand corner.
#
DescriptionSetting
•
'Standard' is the default value.
•
Select 'Lines/text' for line drawings. The lines are sharpened.
•
Select 'Photo' for large photos. The printed output is opti-
mised for large grey areas.
'Print quality'
You can enable this setting, when the 'Preferences' - 'System
properties' - 'Printer properties' - 'Print-darkness (toner reduc-
tion)' setting is set to a negative value. In that case the toner
reduction will not be used when you print posters or photos.
'Keep blackness for
posters and photos'
Chapter 3 - Define your Workflow with Océ Express WebTools 103
Set the print job default settings
To Next Page
Loading...
Need help?
General
