Oce PlotWave 340 User Manual

Solve Problems
How to solve problems with jobs
1.
When there is a problem with a job, the colour of the green 'Jobs - Queue' bar in Océ
Express WebTools turns red.
The System Monitor section of Océ Express WebTools displays the message: 'User inter-
vention required'.
The job that has the problem remains in the queue as an active job, displayed in bold
fonts.
2.
On the user panel detailed information about the problem is displayed. You can use this
information to help you to solve the problem.
Note:
When a media jam occurs often, you can perform the following checks:
- Is the media loaded correctly?
- Did you use the correct media? For more information, see ‘Preferred Océ media types
and sizes’ on page 365
- Did you remove all the pieces of media from the paper path?
Note:
If an error occurs that you cannot solve, please remember the error code displayed on
the user panel and contact the Océ Helpdesk for assistance.
Chapter 8 - Support348
How to solve problems with jobs

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux