Oce PlotWave 340 User Manual

Print the print density chart
When to do
To influence the toner usage of your printer you can print the print density chart and
adjust the print density offset. A negative value reduces the toner usage, a positive value
increases the toner usage.
Print the print density chart
On the multi-touch user panel:
1.
Tap the 'System' thumbnail. A window opens.
2.
In the 'Setup' list in the bottom right corner of the display, select 'Test prints'. A wizard
opens.
3.
Select 'Print density chart'.
4.
Tap Ok.
A 'Print density chart' is printed.
Use the chart to change the print density in Océ Express WebTools, or via 'All settings'
on the user panel.
Chapter 8 - Support358
Print the print density chart

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux