Oce PlotWave 340 User Manual

E-Shredding
Enable or disable the e-shredding function
Introduction
The e-shredding function allows you to securely erase jobs from the system. This prevents
unauthorised people from recovering deleted jobs. When the e-shredding function is en-
abled, you can select an e-shredding algorithm. You can enable the e-shredding function
in Océ Express WebTools. By factory default, the e-shredding function is disabled.
Note:
Refer to the security guide to get detailed information on the e-shredding function.
How to enable the e-shredding function
In Océ Express WebTools:
1.
Open the 'Configuration' - 'Connectivity' - 'E-shredding' tab.
2.
Click 'Edit'.
3.
Select 'Enabled' or 'Disabled'.
Note:
When e-shredding is enabled, the system may require more time to process jobs.
Chapter 3 - Define your Workflow with Océ Express WebTools 137
Enable or disable the e-shredding function

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux