Oce PlotWave 340 User Manual

Scan CAD colour to 'TIFF' format
Introduction
When you want to scan a 'CAD colour' to 'TIFF' format, you can select the presets on
the user panel.
1.
Feed the original face up and centred on the original feeding table.
Note:
You do not need to centre the original precisely. The exact position of the original is au-
tomatically detected by the scanner.
2.
Tap the 'Scan' tile on the user panel and select your preferred location in the scan Smart
Access.
Note:
When you do not select a location the file is sent to the public Smart Inbox.
3.
Tap the 'Scan' tile again. A window with a list of presets opens.
4.
Tap the 'File type' preset.
5.
Select'TIFF'.
6.
Tap the 'Image' preset.
7.
Select 'CAD colour'.
8.
Tap the green button.
Result
A scan to 'TIFF' file is made, and sent to your preferred location. Default you can find
your file in the public Smart Inbox in Océ Express WebTools.
Chapter 4 - Use the Printing System254
Scan CAD colour to 'TIFF' format

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux