Oce PlotWave 340 User Manual

Move the Printing System
Switch off the printing system
Introduction
When you want to switch off the printing system completely, you have to take a few
steps.
1.
Use the on / off button at the front of the printer to switch the printing system off. The
lighted button starts to blink.
Note:
You can also use the 'Shut down' button in Océ Express WebTools.
Attention:
Wait until the on / off button stops blinking.
Chapter 5 - Maintain the Printing System280
Switch off the printing system

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux