Set the print presets
Introduction
With a preset you can pre-define the settings you need for a print job.
In Océ Express WebTools you can make different preset settings:
•
You can choose the default presets from a list of predefined presets. The default presets
are used when you make no additional settings on the user panel, and press the green
button.
•
You can create custom presets yourself. You can create presets per category. The print
settings have four preset categories: 'Media', 'Layout', 'Image', and 'Finishing'
Once you have created a custom preset, you can choose to set this custom preset as default.
Note:
For this procedure you need to log in as System administrator or Power user.
Note:
In the tooltip you can always find a short explanation of the setting.
Define the default preset
In Océ Express WebTools:
1.
Open the 'Preferences' - 'Print job defaults' tab.
2.
Under 'User panel configuration: Default presets for print' select the preset category you
want to change, for example 'Default Layout preset'.
3.
Select the setting you want to use as the default preset, for example 'Standard half size'.
Note:
Under 'User panel configuration: Default presets for print', you can choose a 'Custom'
preset. This way you can make the custom preset you create, the default preset on the
user panel.
4.
Click 'Ok' to confirm, or 'Cancel' to reject your entries.
Define the custom preset
In Océ Express WebTools:
Chapter 3 - Define your Workflow with Océ Express WebTools 145
Set the print presets
To Next Page
Loading...
Need help?
General
