Oce PlotWave 340 User Manual

Replace the residual toner container
Introduction
When you refill the toner, you also need to replace the residual toner container.
Attention:
Do not replace the container during the printing process. You can replace the container
when the printer is on.
How to replace the residual toner container
1.
Open the residual toner compartment.
Chapter 5 - Maintain the Printing System 313
Replace the residual toner container

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux