Oce PlotWave 340 User Manual

Save the currently active licenses
Introduction
You can save all active licenses into one single file.
When to do
Save the currently active licenses before you start a license activation job, or when you
want to save the current license situation.
How to save the license information
Note:
For this procedure, you need to log in as a System administrator or Power user.
1.
Open the 'Support' - 'Licenses' tab.
2.
Click on the 'Save' button.
The 'Save licenses' window opens.
3.
Select a directory, and enter the new file name you want to store the licenses under.
4.
Click the 'Save' button to back up the currently active licenses.
Result
All currently active resale and demo licenses are stored into one single file.
Chapter 6 - License Management324
Save the currently active licenses

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux