Oce PlotWave 340 User Manual

Clear a media jam in the heater section
Attention:
During normal use the fuser has to remain closed. Only open it to remove the media after
a media jam.
When a media jam occurs in the heater section, take the following steps:
1.
Wait a few moments to let the heater cool down.
Chapter 8 - Support350
Clear a media jam in the heater section

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux