How to use the carrier sheet
Introduction
The carrier sheet can help you to scan an original. The use of the carrier sheet depends
on the condition of your original.
When to do
You can use the carrier sheet, when you want to copy or scan:
•
an original that is smaller than A4 size
•
an original that is fragile or damaged
•
an original that is badly creased
•
an original that has other pieces of paper attached to it.
Attention:
When handling the carrier sheet, be very careful not to scratch or otherwise damage it.
Note:
When you use the carrier sheet with colour documents, the colours can shift slightly.
Note:
The carrier sheet is optional and not delivered with the machine. You can order it on
the Océ website.
How to use the carrier sheet
1.
Open the carrier sheet and place the original. The printed side of the original must be
visible through the transparent protection sheet.
2.
Place the carrier sheet with the original face up and centred on the original feeding table.
Attention:
Make sure that you first feed the sealed side of the carrier sheet into the scanner.
3.
Feed the carrier sheet with the original into the scanner.
Chapter 4 - Use the Printing System 187
How to use the carrier sheet
To Next Page
Loading...
Need help?
General
