Oce PlotWave 340 User Manual

Change the media type and media size
Introduction
When you load a new type of media, the system automatically detects the new media and
can ask you to enter the correct media type and size. When the media type or size defined
on the system, are not correct you can change these settings.
Illustration
Define the media type and size when you load new media
On the multi-touch user panel:
1.
A window opens when you load new media.
2.
Choose the correct media type from the list and click Ok.
3.
Choose the correct media size from the list and click Ok.
The printer places the string, with the right media name in the printer image, under the
System menu.
Chapter 5 - Maintain the Printing System 309
Change the media type and media size

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux