Oce PlotWave 340 User Manual

Configure the 'User panel time-out'
Introduction
The printer user panel can automatically return to the Home screen. When you disable
this setting, the user panel display does not return to the Home screen automatically.
When to do
Enable the setting and define a suitable time-out period that does not interfere with the
print productivity.
How to configure the 'User panel time-out'
In Océ Express WebTools:
1.
Open the 'Preferences' - 'System properties' tab.
2.
Click 'Edit' in the 'Printer properties' section, or click on the 'User panel time-out' setting.
3.
When you enable the setting, you must enter a time period as well. If you choose to disable
the setting, the time-out period will not be adjustable.
4.
Click 'Ok' to confirm, or 'Cancel' to reject your entries.
Chapter 3 - Define your Workflow with Océ Express WebTools158
Configure the 'User panel time-out'

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux