Oce PlotWave 340 User Manual

Scan to a Smart Inbox and collect your file
Introduction
When you scan a document on the printer, the public Smart Inbox is the default location
you scan to. You can also choose another Smart Inbox as your location in the Smart Access
of the user panel.
Before you begin
You can create your own Smart Inboxes in Océ Express WebTools. Once you have created
the Smart Inboxes in Océ Express WebTools, they become visible in the Smart Access
on the printer user panel. For more information on how to do this, see ‘Create and open
a Smart Inbox for scan jobs’ on page 119.
Note:
When you do not create Smart Inboxes in Océ Express WebTools, only the public Smart
Inbox is visible as a location.
Scan to a Smart Inbox
1.
Feed the original face up and centred on the original feeding table.
Note:
You do not need to centre the original precisely. The exact position of the original is au-
tomatically detected by the scanner.
Chapter 4 - Use the Printing System258
Scan to a Smart Inbox and collect your file

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux