Make a copy and scale to another size
Introduction
When you want to scale your copy to another size, you can make changes under the ad-
vanced settings.
With the custom setting you can choose any scale percentage you want, between the range
of 10 - 1000%.
Note:
For more information on the other scale modes, see ‘Preset category:Layout ’ on page 227.
Scale your image
1.
Feed the original face up and centred on the original feeding table.
Note:
You do not need to centre the original precisely. The exact position of the original is au-
tomatically detected by the scanner.
The 'Copy' tile is automatically activated on the multi-touch user panel.
2.
Tap the 'Copy' tile. A window with a list of presets opens.
3.
Tap 'All settings'. A list with settings opens.
4.
Tap 'Scale' under the 'Layout' preset.
5.
Tap 'Scale' in the new window and select 'Custom'.
6.
Under 'Custom' select any percentage between 10 - 1000%.
7.
After you made your settings tap 'OK'.
8.
Enter the number of copies and tap the green button.
Note:
Tap 'Release the original', to release the original.
Chapter 4 - Use the Printing System 243
Make a copy and scale to another size
To Next Page
Loading...
Need help?
General
