Oce PlotWave 340 User Manual

Extended Copy Jobs - Presets
Copy presets on the user panel
Introduction
When you do not make different settings in Océ Express WebTools, the printer uses the
default presets for print, copy, and scan jobs.
Below the presets you can use to change the settings for copy jobs on the multi-touch
user panel are listed. The copy presets are divided in four categories: 'Media', 'Layout',
'Image', 'Finishing'.
Note:
For more information on how to change the preset settings, see ‘Set the copy presets’ on
page 141.
Copy presets on the user panel
#
'Finishing''Image''Layout''Media'
'Top Delivery
Tray'
'CAD greyscale''1:1''Any loaded me-
dia'1
'Back output''CAD colour''Half size'Media size and
type of roll 1
'Custom''Photo''Fit to media
width'
Media size and
type of roll 2
'Custom''Custom''Custom'
Chapter 4 - Use the Printing System 223
Copy presets on the user panel

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux