Oce PlotWave 340 User Manual

Accounting workflow
Introduction
After the administrator configures the settings, accounting can be integrated in the
workflow.
Workflow
1.
Define an accounting dialogue and publish it.
2.
Add the Océ PlotWave 340/360 to the devices in Océ Account Console and configure
the tasks.
Note:
Try to retrieve log data every day, when the printer is On.
3.
Run the task update dialogue for the PlotWave 340/360, so the printer recognises the
dialogue.
4.
Enable accounting in Océ Express WebTools.
Workflow on the printer
1.
Create a copy, scan, or print job.
2.
Press the green button, to start the job.
A dialogue appears, asking the user to enter the required accounting information.
When the user does not enter the information, he cannot finish the job.
Chapter 7 - Account Management336
Accounting workflow

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux