Configure External Locations
Configure your locations
Introduction
On the user panel you can find a list of locations you can scan to and print from.
To this location you send your scanned files for storage, or you save files on this location
and you send them to the printer.
You can define the external locations under the 'Configuration' - 'External locations' tab
in Océ Express WebTools.
Types of locations
You can scan to and print from various location types.
#
Location type descriptionLocation type
When you select this location, you can print from your personal
Smart Inbox, or your scanned file is sent to the Smart Inbox of
your choice.
' Smart Inbox '
When you select this location you can print from or scan to the
USB Mass storage device you inserted in the user panel.
'USB'
When you select this location your files are sent via FTP to a
shared folder on a remote workstation.
'FTP'
When you select this location your files are sent via SMB to a
shared folder on a remote workstation.
'SMB'
When you select this location type, you can enter the cloud via
WebDAV and use it as a network drive.
'WebDAV'
When you select this location the printer uses Eneo to sent your
files.
'Eneo' (Optional)
Chapter 3 - Define your Workflow with Océ Express WebTools 151
Configure your locations
To Next Page
Loading...
Need help?
General
