Oce PlotWave 340 User Manual

How to feed an original
Introduction
When you want to copy or scan, it is important to correctly feed the original in the
printer.
Attention:
The scanner can not scan an original that is thicker than 0.8 mm or rigid originals. When
you use the carrier sheet that is available as an option, ensure that the combined thickness
of both the document and carrier sheet does not exceed 0.8 mm. For more information,
see ‘How to use the carrier sheet’ on page 187.
Attention:
Do not retrieve the original from the printer when it is already fed into the scanner. To
release the original press the stop button on the user panel and tap 'Release the original'
under the Smart Access.
How to feed the original
1.
Feed the original face up and centred on the original feeding table.
Chapter 4 - Use the Printing System184
How to feed an original

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux