Oce PlotWave 340 User Manual

2.
Select the 'Scan' tile on the user panel. The scan Smart Access is visible.
3.
Select the preferred Smart Inbox in the Smart Access.
Tap the 'Scan' tile once more, when you want to change the settings.
4.
Tap the green button.
Note:
Tap on 'Release the original' under the Smart Access, to release your original from the
scanner.
5.
Select your scan job in the Smart Access to see the preview of your job.
Result
A scan to file is made, and sent to your selected Smart Inbox.
Collect your file in Océ Express WebTools
1.
Open Océ Express WebTools.
2.
Select the 'Jobs' tab.
3.
Open your Smart Inbox on the right side.
When your Smart Inbox is not visible, click on the white space of 'Open Smart Inbox'
and select the name of your Smart Inbox.
Chapter 4 - Use the Printing System 259
Scan to a Smart Inbox and collect your file

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux