Oce PlotWave 340 User Manual

1.
Open the 'Preferences' - 'Print job defaults' tab.
2.
Select the preset category you want to make a custom preset in and click on 'Edit', for
example 'Custom Image preset for print'.
3.
Fill in a name and description that will be used for the preset on the user panel.
4.
Select the settings you want to use for the custom preset, for example choose to set 'Print
quality' to 'Poster'.
5.
Click 'Ok' to confirm, or 'Cancel' to reject your entries. Your custom preset is now visible,
and can be selected.
Result
Your settings are presented as presets on the user panel. The preset used as default is
highlighted in the list.
Chapter 3 - Define your Workflow with Océ Express WebTools146
Set the print presets

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux