Oce PlotWave 340 User Manual

DescriptionSetting
Fill in the number that replace the # hashes in the name.
The number increases after each scan.
'Start value for ### in
the scan file name'
Fill in the scan filename used for scans to the Smart Inbox.
When the scan filename contains one or more #, the hashes
are replaced by ascending numbers.
'File name for scan to
Smart Inbox'
Enable to print a checkprint of the scan.'Check print'
Note:
The file extensions that are defined in the 'Scan job defaults', cannot be changed via the
'Smart Inbox'.
Chapter 3 - Define your Workflow with Océ Express WebTools106
Set the scan job default settings

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux