Oce PlotWave 340 User Manual

4.
Tap 'Cut size' under the 'Layout' preset.
#
'Add a trailing strip''Add a leading strip'
5.
Tap 'Add a leading strip' or 'Add a trailing strip', and define the values.
6.
Make your settings and tap 'OK'.
7.
Define the number of copies and tap the green button.
Result
The document is printed with a strip attached to the top or bottom.
Chapter 4 - Use the Printing System 237
Make a copy and add a strip

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux