100 Chapter 4 Use the PLC applications to control your workflow
User operations in the Océ Queue Manager
Note: An anonymous user cannot cancel a job from a remote system.
How to cancel active jobs from the Océ Queue Manager
Attention: You can never undo this action.
1. Select the active job in the print queue.
2. From the 'Job' menu, select 'Delete', or click the 'Delete' button on the toolbar.
The printer stops the printing immediately.
If the controller was still processing part of the job, the controller flushes the job.
Note: An anonymous user cannot cancel a job from a remote system.
How to place jobs on hold in the Océ Queue Manager
1. Select the jobs in the print queue or the active print job.
2. From the 'Job' menu, select 'Hold', or click the 'Hold' button on the toolbar.
To put an active print job on hold, press the stop button on the printer operator panel
and then select the option 'Hold'. The job will then be put back in the print queue with
the 'on hold' status.
A job that is placed on hold keeps its position in the print queue. The job will not
print until the job is resumed. While a job is on hold, other jobs are printed. The jobs
that were in the queue behind the job on hold are also printed.
You can select more than one job with the mouse and the shift or control key.
How to change attributes of jobs on hold in the Océ Queue Manager
1. Log on as a key operator or as a system administrator.
2. Select the job on hold in the inbox queue or the history queue.
3. Open the 'Job properties' dialog box.
Use one of the following methods to open the 'Job properties' dialog box.
■ From the 'Job' menu, select 'Properties' or,
■ Click the 'Properties' button on the toolbar or,
■ Right-click the job and select 'Properties'.
4. Select the 'Settings' tab in the 'Job properties' dialog box.
5. You can change the number of sets in the 'Sets' field.
6. You can change the 'Media': 'Roll' 1 / 'Roll' 2 / 'Roll' 3.
7. You can change the 'Color mode': 'Color' / 'Grayscale'
8. You can change the 'Quality mode': 'Check' / 'Release' / 'Presentation'.
To Next Page
Loading...
